Download Signal Generators Programming Guide
Transcript
2 Using IO Interfaces NOTE For the N5161A/62A the softkey menus and features mentioned in this chapter are only available through the Web–Enabled MXG or through SCPI commands. Refer to “Using the Web Browser” on page 11 and to the SCPI Command Reference. Using the programming examples with GPIB, LAN, RS–232, and USB interfaces: • Using GPIB on page 25 • Using LAN on page 31 • Using RS–232 (ESG and PSG Only) on page 61 • Using USB (Agilent MXG) on page 69 Using GPIB GPIB enables instruments to be connected together and controlled by a computer. GPIB and its associated interface operations are defined in the ANSI/IEEE Standard 488.1–1987 and ANSI/IEEE Standard 488.2–1992. See the IEEE website, http://www.ieee.org, for details on these standards. The following sections contain information for installing a GPIB interface card or NI–GPIB interface card for your PC or UNIX–based system. • “Installing the GPIB Interface” on page 25 • “Set Up the GPIB Interface” on page 27 • “Verify GPIB Functionality” on page 28 Installing the GPIB Interface NOTE You can also connect GPIB instruments to a PC USB port using the Agilent 82357A USB/GPIB Interface Converter, which eliminates the need for a GPIB card. For more information, refer to the table on page 26 or go to http://www.agilent.com/find/gpib. A GPIB interface card can be installed in a computer. Two common GPIB interface cards are the Agilent GPIB interface card and the National Instruments (NI) PCI–GPIB card. Follow the interface card instructions for installing and configuring the card. The following table provide lists on some of the available interface cards. Also, see the Agilent website, http://www.agilent.com for details on GPIB interface cards. Agilent Signal Generators Programming Guide 25
Related documents
Signal Generators Programming Guide
Programming Guide, Agilent Technologies Signal
Programming Guide, E4428C/38C ESG Signal Generators
X-Series Signal Generators Programming Guide
Agilent Technologies E8267D PSG Technical data
Programming Guide - Steven M. Anlage Research Page
Agilent Technologies E4438C Programming instructions
Series MG369xB Synthesized Signal Generators Operation Manual
Lotus Domino for AS/400 R5 Implementation
N1921A Operating Guide
Integrating Mac Systems into a Medical IT Infrastructure:
AR-ALPHA