Download netJACK Communication Module

Transcript
Updating Firmware
67/154
Figure 35: Choosing Device
Note: For details, please refer to the Device Assignment section in the
SYCON.net DTM manual for the corresponding Fieldbus or Real-Time
Ethernet protocol.
Download the firmware to the netJACK.
 In the Navigation Area, select Settings > Driver > FirmwareDownload.
 The Firmware-Download window is opened.
Choose the firmware, you want to load to the netJACK.
 Click Browse… button.
 The Select Firmware File dialog is opened.
 Navigate to the folder containing the firmware files, select the
appropriate file and click Open button.
Note: If you choose a firmware that does not fit to the device, an error
message will be issued.
For a list of firmware, please refer to table Reference to Hardware and
Firmware on page 13.
netJACK Communication Module | Installation, Operation and Hardware Description
DOC110504UM04EN | Revision 4 | English | 2013-12 | Released | Public
© Hilscher, 2011 – 2013