Download Optimization Technologies for Cutting

Transcript
NC-Way 1.1
Chapter
2
2-
DESCRIPTION OF THE WORK AREA
The work area comprises:
Menus (see Chapter 1 for a description of the single menus and menu
commands)
Upper Toolbar (see Chapter 1 for a description of the single menus and
menu commands)
Machine Status and Main Message
Graphic Layout
Information about Cutting Dimensions
Info Grid
Alarms Window
Lower Toolbar
Status Bar
Machine Status and Main Message
Allows you to display the machine connection status (on the left) and to display
the Main Error Message or Warning Message of NC or PLC (on the right).
Machine Status could be Automatic or Manual. In relation of the PLC Type
some CYCLES will be available or not. Automatic or Manual Mode are usually
selectable on the Cutting Table Control Panel.
In Automatic Mode “Send to NC” Option is available. On this Machine Status it
will also be possible to execute cutting programs.
In Manual Mode, usually, CYCLES like Sizing, Head or Belts UP / DOWN ,Oil
Open / Close will be available.
Message visible on the Right side it’s usually the Most Important. For a
complete view of all active Errors and Warning we recommend to use the
specific “Alarms and Journal” Page.
Manuale d'uso
29