Download preliminary - baslerweb.com

Transcript
PRELIMINARY
Camera Interface
2.4 Output Signals
Data is output from the L100b using Channel Link LVDS technology.
2.4.1 Channel Link Basics
Channel Link is an LVDS (Low Voltage Differential Signaling) technology for transmitting digital
data. Channel Link uses a parallel-to-serial transmitter and a serial-to parallel receiver to transmit
data at rates up to 1.8 Gbps.
As shown in Figure 2-4, the Channel Link Transmitter converts 28 bits of CMOS/TTL data into four
LVDS data streams. A phase-locked pixel clock is transmitted in parallel with the data streams
over a fifth LVDS link. With each cycle of the pixel clock, 28 bits of input data are sampled and
transmitted. The Channel Link receiver converts the data streams back into 28 bits of CMOS/TTL
data.
Channel Link was developed by National Semiconductor and is a registered trademark of that
company.
Transmitter
Receiver
Data (LVDS)
Data (LVDS)
Data (LVDS)
Data (LVDS)
Transmit Clock
PLL
Clock (LVDS)
PLL
Receive Clock
Figure 2-4: Channel Link Block Diagram
2-6
BASLER L100b Series