Download preliminary - baslerweb.com
Transcript
PRELIMINARY Camera Interface 2.4 Output Signals Data is output from the L100b using Channel Link LVDS technology. 2.4.1 Channel Link Basics Channel Link is an LVDS (Low Voltage Differential Signaling) technology for transmitting digital data. Channel Link uses a parallel-to-serial transmitter and a serial-to parallel receiver to transmit data at rates up to 1.8 Gbps. As shown in Figure 2-4, the Channel Link Transmitter converts 28 bits of CMOS/TTL data into four LVDS data streams. A phase-locked pixel clock is transmitted in parallel with the data streams over a fifth LVDS link. With each cycle of the pixel clock, 28 bits of input data are sampled and transmitted. The Channel Link receiver converts the data streams back into 28 bits of CMOS/TTL data. Channel Link was developed by National Semiconductor and is a registered trademark of that company. Transmitter Receiver Data (LVDS) Data (LVDS) Data (LVDS) Data (LVDS) Transmit Clock PLL Clock (LVDS) PLL Receive Clock Figure 2-4: Channel Link Block Diagram 2-6 BASLER L100b Series