Download sms tutorials

Transcript
1-2
SMS 9.0 Tutorials
The interfaces in SMS are endorsed by the USACE-Engineering Research and
Development Center (ERDC) at the Waterways Experiment Station (WES) as well
as the Federal Highway Administration (FHWA).
Each numerical model is designed to address a specific class of problems. Some
calculate hydrodynamic data such as water surface elevations and flow velocities.
Others compute wave mechanics such as wave height and direction. Still others track
contaminant migration or suspended sediment concentrations. Some of the models
support both steady-state and unsteady (dynamic) analyses, while others support only
steady-state analysis. Some support supercritical flow, while others support only
subcritical.
The finite element mesh, finite difference grid or cross section entities, along with
associated boundary conditions necessary for analysis, are created within SMS and
then saved to model-specific files. These files are used as input to the hydrodynamic,
wave mechanic, contaminant migration and sediment transport analysis engines. The
numerical models create solution files that contain the water surface elevations, flow
velocities, contaminant concentrations, sediment concentrations or other functional
data at each node, cell or section. SMS reads this data to create plots and animations.
SMS can also be used as a pre- and post-processor for other finite element or finite
difference programs as long as the programs can read and write files in a supported
format. To facilitate this, a generic interface is available to define parameters for a
proprietary model. SMS is well suited for the construction of large, complex meshes
(up to hundreds of thousands of elements) of arbitrary shape.
Please note that in these tutorials, reference to a menu item will be as follows:
Menu | Menu-Item. For example: File | Exit indicates to select the Exit item from the
File menu.
1.1
SMS Help
Accompanying SMS is the SMS online Help, which fully describes the available
options in each dialog box. The help can be accessed through the Help menu inside
of SMS or from the Help button on each dialog box. In addition, help files are
available for some of the numerical models supported by SMS.
1.2
Suggested Order of Completion
Most of these lessons are developed for two dimensional finite element meshes and
finite difference grids. If you want to use SMS for its River Hydraulic Module and
HECRAS interface, you may want to examine the Lesson 2 and then skip to Lesson
22.
Users interested in finite element modeling should review Lessons 2 through 5. These
lesions describe methods for generating finite element meshes, visualizing data on