Download USER MANUAL - Kramer Electronics

Transcript
Contents
Contents
1
2
2.1
3
3.1
4
5
6
6.1
6.2
6.3
Introduction
Getting Started
Quick Start
Overview
Terminology Used in this User Manual
Your VP-12x8 12x8 UXGA Matrix Switcher
Installing the VP-12x8 on a Rack
Connecting the VP-12x8
Connecting the VP-12x8 Rear Panel
Controlling via RS-232 (for example, using a PC)
Control Configuration via the Ethernet Port
1
1
1
3
4
4
8
9
9
11
12
6.3.1
6.3.2
6.3.3
Connecting the ETHERNET Port directly to a PC (Crossover Cable)
Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable)
Control Configuration via the Ethernet Port
12
13
13
7
7.1
7.2
Operating the VP-12x8
Displaying Unit Characteristics
Confirming Settings
14
14
14
7.2.1
7.2.2
Toggling between the At Once and Confirm Modes
Confirming a Switching Action
15
15
7.3
Storing/Recalling IN/OUT Configurations
16
7.3.1
7.3.2
7.3.3
Storing an Input/Output Configuration
Recalling an Input/Output Configuration
Deleting an Input/Output Configuration
16
16
17
7.4
8
8.1
Locking the Front Panel
Flash Memory Upgrade
Switcher Flash Memory Upgrade
17
18
18
8.1.1
8.1.2
8.1.3
Downloading from the Internet
Connecting the PC to the RS-232 Port
Upgrading Firmware
18
18
19
8.2
Ethernet Flash Memory Upgrade
23
8.2.1
8.2.2
8.2.3
Downloading from the Internet
Connecting the PC to the RS-232 Port
Upgrading Firmware
23
23
24
9
10
11
Technical Specifications
Table of Hex Codes for Serial Communication
Kramer Protocol 2000
25
26
27
i