Download PortMaster Command Line Reference

Transcript
DLCI Commands
add dlci
DLCI Commands
The DLCI table commands in Table 8-2 configure the DLCI table used to split a Frame
Relay interface into primary and secondary subinterfaces according to the data link
connection identifier (DLCI).
Table 8-2
DLCI Table Commands
Command Syntax
add dlci|ipdlci|ipxdlci Locname Dlci [:Ipaddress|:Ipxnode]
- see page 8-33
delete dlci|ipdlci|ipxdlci Locname Dlci
- see page 8-35
show location Locname
- see page 8-29
add dlci
This command sets the Frame Relay subinterfaces for a specified location that has been
configured to use Frame Relay service.
add dlci|ipdlci|ipxdlci Locname Dlci [:Ipaddress|:Ipxnode]
Note – ipdlci is a synonym for dlci.
✍
ipdlci or dlci
Use for IP connections.
ipxdlci
Use for IPX connections.
Locname
Location name that is in the location table.
Dlci
DLCI number, from 1 to 1023.
:Ipaddress
Optional IP address of the router attached to the permanent
virtual circuit (PVC) represented by the DLCI.
:Ipxnode
IPX node address of the PortMaster attached to the
permanent virtual circuit (PVC) represented by the DLCI.
This value is the PortMaster MAC address—a 48-bit number.
Locations and DLCIs
8-33