Download SMS8 Alarm Control Panel

Transcript
SMS8 Series
24
3.2. How To ‘Home Arm’ the System (STAY)
NOTE: If no zones are programmed to be activated when in HOME mode, Home arm is
automatically disabled. This mode is used when protecting your home or office while you are there.
1.
2.
The keypad must display
“Ready” before you are able
to arm the system.
Ready
Press for 2 seconds
Hold the Q/H Arm button to
home arm the system
without having to enter a
user code.
3.
Exit now
4.
HomeARM
During the exit delay the
keypad will display “Exit
now”.
The keypad will display
“HomeARM” and the
ARMED light will turn on.
3.3. How To ‘Disarm’ The System
Enter a valid user code
(default is 1234).
1.
2.
3.
Press
Press the “ENTER” key
then the system will disarm.
The keypad will display
“Ready”. The strobe light
will flash for 4 seconds and
the armed light will turn off.
Ready
RhinoCo Technology © 2002