Download User`s Guide - CNET Content Solutions

Transcript
General Information
Print Menu (continued)
Submenu
Menu Selections
Options
Print Position
X Offset
-500 / -499 / ... / -1 / 0* / 1 / Moves the print start position (at the
... / 499 / 500Dots
top-left corner of pages) horizontally up
to -500 (left) to +500 (right) dots in
300 dpi.
Y Offset
-500 / -499 / ... / -1 / 0* / 1 / Moves the print start position (at the
... / 499 / 500Dots
top-left corner of pages) vertically up to
-500 (up) to +500 (down) dots in
300 dpi.
Auto FF
-
On / Off*
Allows you to print the remaining data
without pressing Go.
HP LaserJet
Font No.
I000 / ... / I059* / ... / I071
Sets the font number.
Font Pitch
0.44 / ... / 10.00* / ... /
99.99
Sets the font pitch.
4.00 / ... / 12.00* / ... /
999.75
Sets the font size.
Symbol Set
PC-8* / PC-8 D/N / ...
Sets the symbol set or the character
set.
Table Print
-
Prints the code table.
If Change Emulation appears on the
LCD, choose Auto or HP LaserJet in
Emulation of the Print Menu.
(See page 81.)
Auto LF
On / Off*
ON: CR i CR+LF, OFF: CR i CR
Auto CR
On / Off*
ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Auto WRAP
On / Off*
Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Auto SKIP
On* / Off
Chooses whether a line feed and
carriage return will happen when the
machine position reaches the bottom
margin.
Left Margin
##
Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting is
0 cpi.
Font Point
Descriptions
Font Pitch menu will appear when
you choose I059 to I071 in the
Font No. setting.
Font Point menu will appear when
you choose I000 to I058 in the
Font No. setting.
The factory settings are shown in Bold with an asterisk.
82
3