Download Manual
Transcript
Assembling Procedure : First, screw the clip head (1) and fasten by the nut fixing tool. Connect the blue pipe which is on the above of the pedal switch socket to the above pipe connecter (2) on the main part, then connect the orange pipe to the below pipe connecter (3) on the main part. Press the pedal (4) to make the clip head drop down and screw up(5) by tool(6), assembling procedure completed. (1) (3) When the clip head can’t suit the size of aluminum lip in normal use, adjust the nut(1) to loosen or fasten. Screw down the nut clockwise--loosen Screw up the nut counterclockwise--fasten (2) (1) (4) (6) (5) Filler Co., Ltd. Disassembling Procedure : reverse step according to the assembling procedure. Tel :(02)2593-1616 2591-6873 Fax :(02)2586-4587 http://www.filler.com.tw E-mail: filler@filler.com.tw