Download - Power Logic

Transcript
LPCT Type Current Sensors
Test Accessories
Installation
ACE917 Injection Adapter
Function
DE80065
The ACE917 adapter is used to test the protection chain with a standard injection
box, when the Sepam™ relay is connected to LPCT sensors. It is inserted between
the standard injection box and the LPCT test plug (either integrated in the Sepam
CCA670/CCA671 interface connector, or transferred by means of the
CCA613 accessory).
2.76
(70)
in.
(mm)
The following are supplied with the ACE917 injection adapter:
b Power supply cord
b 9.8 ft (3 m) cord to connect the ACE917 to the LPCT test plug on
CCA670/CCA671 or CCA613
10.24
(260)
6.69
(170)
Characteristics
Power Supply
Protection by Time-Delayed Fuse 0.2 x 0.79 in (5 mm x 20 mm)
115/230 V AC
0.25 A Rating
DE50564
CCA613 Remote Test Plug
Function
The CCA613 test plug, flush-mounted on the front of the cubicle, is equipped with a
9.8 ft (3 m) cord to transfer data from the test plug integrated in the CCA670/CCA671
interface connector on the rear panel of the Sepam relay.
DE80117
DE80045
Dimensions
in.
(mm)
in.
(mm)
Mounting lug
Accessory Connection Principle
6
Cable
2.66
(67.5)
2.66
(67.5)
1.73
(44)
HAZARD OF CUTS
Trim the edges of the cut-out plates to remove any
jagged edges.
Failure to follow this instruction can cause
serious injury.
DE80047
Front View with Cover Lifted
CAUTION
1.97
(50)
3.15
(80)
Right Side View
0.51
(13)
in.
(mm)
2.72
(69)
1.81
(46)
Cut-Out
© 2007 Schneider Electric. All Rights Reserved.
63230-216-208C1
139