Download "user manual"

Transcript
Chapter 14 Built-in PID Function
%KX[0+1050B] ~ %KX[287+1050B] area is the common bit area of the block PID loop. The bit state and settings of each bit are
collected and arranged on the front of each PID block. Therefore, 32 bits, the max. no. of loops that PID function may use in a block is
collected, forming a double-word, and the state and setting of each bit are saved in good order of bits.
%KW0024 ~ %KW0055 area is the individual data area for PID block 0 and loop 0, where the setting and state of block 0 and loop 0
are saved. The loop setting for the PID loop such as SV, dPV_max, MV_man, T_s, Kp, Ti, Td, MV_max, MV_min and dMV_max are
saved in the area, and during the execution of PID function, the state of PID loops such as PV, ETC, MV, MV_rvs, ERR, MVp, MVi,
MVd and PV are also saved. A user may change PID setting simply by writing data on the memory and get the result reflected to the
next cycle.
%KW0056 ~ %KW1047 area is the memory of loop 1 through 31 with the format of block 0 & loop 0. Each loop independently works
and may execute auxiliary operation like the application of cascade. Additionally, the K device memory configuration mentioned in the
end of user’s manual may help you understand the memory location of PID.
The location and order of the memory area as mentioned above may change without prior notice to improve the product performance.
Notes
1) PID memory statement format
_PID[B]_[L]MAN
B: block, L : loop
i.e.) _PID3_05MAN : means MAN bit of block 3 and loop 5.
2) Common bit area
i.e.) _PID3_25PAUSE : because of block 3 and loop 25, it represents the location of %KX[32+1050B+L]
= %KX3207.
3) Individual data area
i.e.) _PID5_30SV : because of block 5 and loop 30, it represents the location of %KW[24+1050B+32L]
= %KW6234.
14-11