Download Heating System

Transcript
Assembly
Step 1:
Take the cardboard box apart using
a sharp knife or scissors. (Pic.1).
Assembly
Insert the enclosed pieces of black
plastic to ensure a tight fit. (Pic. 5).
Take the Warmer out of the box.
(Pic.2).
Pic. 1
Step 3:
Insert the overhead stand into the
bed at the available hole. (Pic.3).
Step 2:
Pic. 2
The 2 holes on the stand and 2
holes on the bed should align. Use
one hand to hold the stand and the
other hand to insert the screw. (Pic. 4).
Pic. 5
Step 4:
Assemble the heating system onto
the stand. (Pic. 7, 8).
Pic. 7
Pic. 3
5
WARMER 3.10 - 3.18 VER1.1
Tighten the screws with a spanner.
Make sure washers are used.
(Pic. 6).
Pic. 6
Pic. 8
Pic. 4
WARMER 3.10 - 3.18 VER1.1
6