Download ABEL Design Manual

Transcript
Hierarchical Design Considerations
Hierarchical Design Considerations
The following considerations apply to hierarchical design.
Prevent Node Collapsing
Use the signal attribute ‘keep’ to indicate that the combinational node should not be
collapsed (removed). For example, the following ABEL-HDL source uses the 'keep'
signal attribute:
MODULE sub1
TITLE 'sub-module 1'
a,b,c pin;
d
pin ;
e
node istype 'keep';
Equations
e = a $ b;
d = c & e;
END
Node Collapsing
All combinational nodes are collapsible by default. Nodes that are to be collapsed (or
nodes that are to be preserved) are flagged through the use of signal attributes in the
language. The signal attributes are:
Istype 'keep'
Do not collapse this node.
'collapse'
Collapse this node.
Collapsing provides multi-level optimization for combinational logic. Designs with
arithmetic and comparator circuits generally generate a large number of product
terms that will not fit to any programmable logic device. Node collapsing allows you to
describe equations in terms of multi-level combinational nodes, then collapse the
nodes into the output until it reaches the product term you specify. The result is an
equation that is optimized to fit the device constraints.
Selective Collapsing
In some instances you may want to prevent the collapsing of certain nodes. For
example, some nodes may help in the simulation process. You can specify nodes you
do not want collapsed as Istype 'keep' and the optimizer will not collapse them.
ABEL Design Manual
42