Download USER MANUAL - Kramer Electronics

Transcript
Installing the Audio-Video Matrix Switcher
Table 5: Machine # Dipswitch Settings
MACHINE #
6.3.2
DIPSWITCH
1
2
1
ON
OFF OFF OFF
2
OFF ON
OFF OFF
3
ON
OFF OFF
4
OFF OFF ON
OFF
5
ON
OFF
6
OFF ON
ON
OFF
7
ON
ON
OFF
8
OFF OFF OFF ON
9
ON
10
OFF ON
OFF ON
11
ON
OFF ON
12
OFF OFF ON
ON
13
ON
ON
14
OFF ON
ON
ON
15
ON
ON
ON
ON
3
4
OFF ON
ON
OFF OFF ON
ON
OFF ON
ON
Understanding the SYSTEM Mode
The terms audio-follow-video1 and audio breakaway2 are well known.
Sometimes signals other than audio signals need to switch simultaneously and
at other times, need to switch independently. For example:
Non-linear editing systems, that sometimes combine video with analog
audio and at other times combine video with digital audio
Duplication systems, that make Master tapes from programs with
different formats: composite analog, component analog and component digital
DIP 5 defines whether the unit communicates with other switchers via a
common control line.
You can set DIP 5 OFF to disable the Follow-SYSTEM mode in Stand alone
switcher applications3.
You must set DIP 5 ON to enable the Follow-SYSTEM mode in an
interconnected varied-format switcher application4.
Refer to section 8.2 for a description of the MENU’s Follow-SYSTEM and
Breakaway-from- SYSTEM modes.
1 Video and the audio channels switch simultaneously in the same way
2 Audio channels switch independently from the video channels
3 See section 6.1
4 See section 6.2
12
KRAMER: SIMPLE CREATIVE TECHNOLOGY