Download Untitled
Transcript
IS300 Series Servo Drive User Manual Preface Preface The IS300 series servo drive is specially designed for the permanent magnet synchronous motor (PMSM). It provides wide coverage of capacity (rated current 2.1–725 A, rated power 400 W–400 kW). In addition to standard servo drive functions, IS300 can also implement the control of pumps. It is a cost effective servo drive in the middle to high power range of the existing market. This manual is a guideline for the selection, installation, parameter setting, on-site commissioning and troubleshooting of the IS300 servo drive. Before using the servo drive, please read this manual carefully so that you fully comprehend the features of the product. Please ensure that the manual is kept safely before forwarding to the end user. Upon Unpacking, Please Ensure That: 1. The nameplate model and ratings of the servo drive match your order. The box contains the product, the certificate of conformity, the manual and warranty. 2. The product is not damaged. If you find any omission or damage, please contact Inovance or our agent immediately. First-time Use The person who uses this product for the first time must read the manual carefully. If they have any doubt concerning some functions or performance, please contact our technical support personnel for advice, thereby ensuring the correct use of our product. With our commitment to constant improvement of the servo drive, our company may change the information without further notice. The IS300 series servo drive complies with the following international standards: • IEC/EN 61800-5-1: 2003, Adjustable speed electrical power drive systems - Safety requirements • IEC/EN 61800-3: 2004, Adjustable speed electrical power drive systems – Part 3: EMC requirements and specific test methods Some products have passed the CE certification. -1-