Download Vision Pro
Transcript
Vision Pro™ User Manual and Installer Guide Rack Mounting For installation in a 19” rack, remove the two case screws on the left and right sides of the unit. Place a rack-mount adaptor on each side and loosely replace screws through the rack-mount adaptors and case cover. Align the rack-mount adaptor front tabs so that their front edge is flush with the backside of the front panel and so they are vertically aligned with the front panel. Retighten the screws. It is suggested that a 1U space be left above and below the VisionPro for better cooling. © 2003 Lumagen, Inc. 9 Rev 1.13