Download DraftBoard Unlimited : Reference Guide
Transcript
Structuring Drawings Bringing a specified view to the back 1. Select the view. 2. Choose Send To Back from the Views pull-down menu. This counteracts the Auto Front command, so when you click, you activate another view rather than selecting objects. Auto Front This command only works for views. The Auto Front command in the Views menu overrides the Bring To Front or Send To Back settings. When this setting is in effect, you can simply click on a view to bring it to the front and make it active. Handling overlapping views The view control commands in the Views menu allow you to control the active view. When you have overlapping views, you can think of them as a stack where only the top view can be active. If the Auto Front command is turned on and you click a view it comes to the top of the stack and you can work in it. This may cause some problems when you click an object in the top view to select it, but an underlying view is activated instead. To remedy this situation, turn off the Auto Front command. Select the view you want to work in and choose Bring To Front from the Views menu. The objects in the view you brought to the front remain on top, even when you click a different view visible in the top view’s space. Draw View Boundaries This command in the Views menu shows the boundaries of all inactive views. This boundary will be printed if you leave it displayed when you choose the Print command. If you want to print the view without boundaries deactivate Draw View Boundaries in the Views menu. How Detail Views work When you create a detail view with the Detail View tool on the Tool palette or the Sheet Into View command in the Views menu, you see the same model through a second camera—the Detail View Camera. The Detail View camera behaves like the Sheet Camera except it displays its view of the model in a View window on the sheet. 10 All views displaying the same model are associative. For example, when you change the geometry on the sheet, the geometry in the view window changes, and vice versa. When you have several views displaying the same model they have to be associative, because no matter which view is active—the Sheet View or any Detail View—you are always editing the same model. Creating Views using the Sheet Into View command The Sheet Into View command places all the geometry on a sheet including dimensions, text, hatching, and fills into one view window (the front) at the scale you specify. 172