Download 4 - Codex
Transcript
Introduction This manual is intended to provide help and information in various more-technical aspects of Codex systems, such as networking, naming-conventions, LUTs, the Virtual File System, Offloading to LTO or RAID systems, and software installation. It can be found at http://www.codexdigital.com/techdocs Software updates and installation instructions can be found at http://www.codexdigital.com/software 1 Using Linux on the Codex Codex machines run a customized version of Linux, which is always present and available behind the normal Codex User Interface (Codex UI). Many of the setup and installation procedures require direct access to Linux. In order to do this, you will first need to connect a keyboard, which may be plugged into either USB port on the machine. To switch to the Linux screen: press C trl/Alt/ F1 To switch back to the Codex UI: press Ctrl/Alt/ F7 (Ctrl/Alt/ F3 on the Codex Portable) If your system does not have a Touchscreen, or if you do not have a screen connected, the Linux command line can be accessed from a remote computer – see the section Co nnectin g t o t he Code x t o acce ss the Linu x co m mand line. 1.1 Logging on to Linux The Linux screen will initially be full of some of the startup logging information, which you can usually ignore. You need to enter a username and password, which by default are both simply co dex. They can be changed if necessary, but this should only be done with the help of someone familiar with Linux, since you could easily lose all access if mistakes were made. To log-on, press <enter> then type: codex <enter> You will now see a prompt, which will look like this: [codex@codex11020 codex]$ The digits are based on the serial number of the machine and will therefore vary. This logon allows you to do various basic things on the machine, but in order to make serious adjustments or install new software you have to upgrade your status to that of Superuser. Type: su <enter> When prompted for a password type: codex <enter> You are now logged in as root, the Linux name for the chief user. This is the equivalent of the Administrator on a Windows systems. The root user on Lin ux can e xecute a ny co mma nd – inclu din g the deletion of vit al sy ste m files – so cautio n an d cert aint y is necess ary be fo re p er for ming any t asks. 1.2 Restarting the Codex software without rebooting Note: Eject Datapacks before doing this. Logged in as root, type: telinit 3 <enter> Wait for the Linux prompt to re-appear. If it does not, press CTRL-ALT-F1. Then type: telinit 5 <enter> 1.3 Exiting Linux Logged in as root, type: exit <enter> to leave the root user, then CODEX TECHNICAL USER MANUAL V1.0 11.10 PAGE 3