Download K4000 - USER MANUAL

Transcript
Danaher Motion S.A. CH-1029 Villars-Ste-Croix
Dissipation and Dynamic Braking Resistors ratings
Model
KT4005
KT4010
KT4015
KT4020
KT4030
KT4040
KT4060
KT4090
KT4120
Dissipation
Watts
200
400
600
750
900
1200
1800
2700
3600
Braking resistors
Ω / Watts - external
22Ω/400W
22Ω/400W
22Ω/400W
15Ω/1200W
15Ω/1200W
6Ω/1500W
6Ω/1500W
4Ω/2000W
4Ω/2000W
Type Part Numbering
Standalone IP20 units
KT40xx-00
KT40xx-01
KT40xx-10
KT40xx-11
Without PC560 and external dynamic braking resistor
Without PC560, with external dynamic braking resistor
With PC560 and without external dynamic braking resistor
With PC560 and with external dynamic braking resistor
IP54 cabinet unit
KU40xx
for cabinet with convection cooling up to KU4015
for cabinet with fan cooling for larger power ratings
KV40xx
for cabinet with heat exchanger air – air
KW40xx
for cabinet with heat exchanger air – water
KQ40xx
for cabinet with air conditioning
Overload protection
UL requires an external overload protection
Connecting the K4000 to a transformer
The K4000 can be connected to any input voltage from 3 x 200 V to 3 x 480 V, 50 /
60 Hz, without a line transformer.
Nevertheless, if the input voltage is higher than 480 V or the installation requires a
galvanic insulation in front of the drive, following rules must be respected:
• Don't use an auto-tranformer but only a transformer with separated windings.
• The output voltage of the transformer should not be higher than 460 V.
Page 8 / 48
User Manual K4000
S476-gb-0348