Download OPERATOR DISPLAY UNIT DISPLAY UNIT
Transcript
Work with Chart Windows 3.3.8 To Select a Toolbar's Command Button To select a toolbar's command button click the mouse left button at the moment when the cursor is on the toolbar button. 3.3.9 To Display the Status Bar To display the status bar, check WINDOW\STATUS BAR menu item. 3.3.10 To Hide the Status Bar To hide the status bar, uncheck WINDOW\STATUS BAR menu item. 3.4 WORK WITH CHART WINDOWS The Chart Window is the principal facility for displaying graphic information about the navigational situation and graphic input of commands. The Chart Window is designed for displaying the following objects: • Navigational charts; • VTS chart; • Sensor charts; • Data panels. It is possible to create several Chart Windows for displaying different fragments of the area, or fragments on different scales. All the operations with chart windows except the chart window configuration loading operation (see sec.3.4.7) are privileged. The performance of these operations requires “Window Configuration” privilege. In the Privilege Request mode, window moving and sizing operations are prohibited if the current access level does not allow their performance. All the commands with regard to the Chart Windows entered via the menu, toolbar or hot keys will be applicable to the objects of the active Chart Window only. 3.4.1 To Create a New Chart Window To create a new Chart Window select CHART\WINDOW\NEW menu item or press key <Ctrl>+<Alt>+<Shift>+<N> combination: a new Chart Window will be displayed on top of all the existing objects. As a new window is opened, the current maximised window ceases to be maximised. Notes: 1. The new Chart Window will have a configuration saved as the Initial Configuration. At the time of delivery Initial Configuration is determined by the manufacturer and can then be re-set by the user as described in sec.3.4.5. 2. The new Chart Window will have “Unnamed” name. To rename the Chart Window use the renaming procedure described in sec.3.4.8. 3. The maximum number of Chart Windows is set by MaxViews variable of NHClient0.ini file’s [Mode] section, the default value being 5. Chapter 3. Work with Desktop Objects. 45