Download User`s Guide
Transcript
User’s Guide 3.5.5 Power Consumption Power figures are given in the table below for the Module power consumption in various situations. These are Module power figures. Off-Module power consumption (e.g. display backlight, display power, Carrier board devices) is not included here. What is included in these power figures: everything on the Module – the TI Cortex A8 SoC, the DDR3 DRAM, the Module power supplies, the Module LVDS transmitter, the GBE controller and miscellaneous Module circuits. Power measurement is done with MO-300 SATA Module, mini-PCIe Wi-Fi Module, HDMI Display & Ethernet cable is present in the Evaluation carrier wherever it is not mentioned. Power figures are less for LVDS display and it is not shown in the below table. The power figures below given below are subject to change. State/Activity CPU Freq Module Power USB Enabled? PCIe+GBE Enabled? SATA Enabled? Notes Active state 1.0 GHz 5.9 W Yes Yes Yes Linux Desktop Active state 1.0 GHz 6W Yes Yes Yes 2D Graphics demonstration loop Active state 1.0 GHz 6.5 W Yes Yes Yes 3D Graphics demonstration loop Active state 1.0 GHz TBD Yes Yes Yes Stress test-85% CPU Load Active state 1.0 GHz 4.7 W Yes Yes Yes MO-300 SATA, miniPCIe Module not present & Etherent cable is not plugged in. Standby state - TBD Yes Yes Yes Deep sleep state - TBD Yes Yes Yes Standby state - TBD Yes No No Deep sleep state - TBD Yes No No There are many options, configurable in software. And there are trade-offs: for example, the “Power Save” option does save power and the response to events such as keyboard and mouse activity can be sluggish. Evaluation units are available from Kontron to allow users to check out some of these tradeoffs. 48 www.kontron.com