Download Contents: HARDWARE NAVIGATION

Transcript
MAIN MENU
Searching By Name
Tap the “By Name” button and then select the type of POI that you
are looking for.
Use the
button or the
button to scroll through the options
and when you have found the right catergory, tap it to hightlight it
and then press the “OK” button.
Type in the Name of the Point of Interest that you are looking for.
After the first 3 letters have been entered, a list will be displayed.
You can select from the list or you can continue to enter the name
to refine the list.
Tap on the “List” button and then use the
button to scroll through the options.
button or the
When you have found the correct Point of Interest that you are looking for, select it and then tap the
“OK” button. Tap the “Confirm” button to begin the trip to the location.
Waypoints
This option allows you to create a route with multiple points along
the way. These points can be places you wish to stop or multiple
stops on a journey.
When first used the Waypoint screen will be blank.
Tap the Add button to add a waypoint to you journey.
Waypoints are added in the same way that you would select a
destination as previously described in this manual. One option is
to add “Current Location”. This adds the current GPS location to
the list. This is useful if you wish to come back the same way or
navigate to something that you have seen at a later time. Repeat
as required.
www.navig8r.com.au/G35
42