Download LA Network Manager Software Manual - AV
Transcript
The following procedure features an overview of how to create and manage a System (Virtual or Physical) using the LA NETWORK MANAGER software: 1. ‘‘Units Over Network’’ window (list of the Units) Fast create, delete, or modify the Units (IP Address, Unit Type, Preset) composing the System by left and right mouse clicking operations (see section 6.2). 2. ‘‘System/Groups’’ window (list of the Groups and attached Units) Fast form the Groups and assign Units to each one by dragging and dropping Units from the ‘‘Units Over Network’’ window (see section 6.3). 3. Control window (Unit and Group Parameter settings) Fast set the Group Parameters (apply for all Units in the selected Group) and the Unit Parameters (apply only for the selected Unit) by mouse clicking operations. The Group Parameters are the Mute, Gain, Delay, and contour EQ parameters (see step #4). The Unit Parameters are the Mute, Gain, Delay, and Polarity parameters. The Gain and Delay parameters have their Group and Unit values summed in the ‘‘Abs.’’ columns that show absolute values. In the Online Mode, this window provides real-time monitoring and control of each Group and Unit status (including audio signal path and faults) (see section 6.4). 4. ‘‘Contour EQ’’ windows (Quick tonal balance for each Group) For each group a selectable ‘‘Contour EQ’’ window allows fast intuitive 5+1 band contour EQ settings (mouse click and drag operations) (see section 6.5). 5 filters are fixed frequency filters and 1 filter is a parametric EQ filter. 5. Command Toolbar (File and Network functionalities, user options) Feature System file, Network, and software option menus (see section 6.6). NETMAN_UM_E N_1.1.0.45 w w w .l-ac ous ti cs .c o m 17/42