Download ELAN Converter

Transcript
ELAN Converter™
2.5
Version 3.0
ELAN Converter
34
Batch Conversion Settings
When you start up the application the first time, you might be overwhelmed by
the large number of settings – you will see over fifty different buttons, tabs, dropdown lists and check boxes. Although it seems to be a very complex product,
ELAN Converter™ is in fact quite a simple tool that does nothing else but takes the
input files and converts them into PDF. In this Chapter of the Users Manual we are
going to guide you through the numerous options, explaining each of them in a
great detail. We will also discuss some typical scenarios that service bureaus
encounter on a daily basis, and will show you how to handle those chores with
ELAN Converter™.
In general, the settings described here apply to both Bach and Watch (Hotfolder)
operation, except where noted.
2.5.1
Batch Conversion
Once you have added items to the Selection List, you are ready to start the
conversion if you accept the default settings.
In Batch Mode, you initiate the batch conversion by clicking on the Convert button
on the left side of the screen:
Alternatively, you can choose File | Convert to initiate the conversion. If ELAN
Converter™ finds a problem with your settings, it will report it for you. If
everything looks valid, the conversion starts right away.
During the conversion a progress indicator is shown on the screen, where you can
see the current file name and the percentage of the conversion job done:
You can terminate the conversion in the middle by clicking the Cancel button.
After the conversion is completed, the following message pops up:
(C) 2003 -2008 ELAN GMK