Download Installation Manual - Support

Transcript
14
Installing Bright Cluster Manager
3.1.2 Compute Nodes
• Intel Xeon or AMD Opteron CPU (64-bit)
• 1GB RAM (at least 4GB is recommended for diskless nodes)
• 1 Gigabit Ethernet NIC
3.2
Supported Hardware
The following hardware is supported:
3.2.1 Compute Nodes
• SuperMicro
• Cray
• Cisco
• Dell
• IBM
• Asus
• Hewlett Packard
Other brands are also expected to work, even if not explicitly supported.
3.2.2 Ethernet Switches
• HP ProCurve
• Nortel
• Cisco
• Dell
• SuperMicro
• Netgear
Other brands are also expected to work, although not explicitly supported.
3.2.3 Power Distribution Units
• APC (American Power Conversion) Switched Rack PDU
Other brands with the same SNMP MIB mappings are also expected
to work, although not explicitly supported.
3.2.4 Management Controllers
• IPMI 1.5/2.0
• HP iLO 1/2/3
© Bright Computing, Inc.