Download Adept MV Controller User`s Guide
Transcript
Appendix E Alphabetical Listing User action: Continue to use the system. Contact Adept Customer Service if this error occurs repeatedly. *Unexpected zero index* Mtr n (–1005) Explanation: A zero index signal was received from the encoder for this motor at an unexpected time. The encoder may be gaining or losing counts, there may be a hardware problem with the zero index signal, or the Counts per zero index configuration parameter may be set incorrectly. User action: Turn on high power, calibrate the robot, and continue to use the system. If this error occurs repeatedly, contact Adept Customer Service. *Unknown editor command* (–363) Explanation: An unknown keystroke or extended command was issued while using the SEE program editor. User action: Enter another command. *Unknown error code* (–800) Explanation: An error code that does not correspond to a known error message was received by V+ from an external device. User action: If an external computer is communicating with V+ when the error occurs, verify that it is sending proper error codes. Otherwise, a software error is indicated. It would be appreciated if you would report the error to Adept Application Engineering. Please include the details of the error message and exactly what you were doing at the time the error occurred. *Unknown function* (–462) Explanation: While accepting a program statement, V+ has encountered a reference to a function that it does not recognize. This could be due to a mistyped function name or the leaving out of an operator between a symbol and a left parenthesis. User action: Check the spelling and syntax and reenter the line. *Unknown instruction* (–452) Explanation: An instruction was entered (or read from a disk file) that was not recognized by the system. This error is often caused by mistyping the instruction name, or trying to use a command as an instruction Adept MV Controller User’s Guide, Rev. A 351