Download Quick start guide
Transcript
1 2 Device overview 1 1 Display screen 2 3 Starting therapy How to start/stop therapy 2 Manual switch to activate inhale (right) and exhale (left) phases 1 : Auto 222 23 l/min l/min -40 cmH2O 4 Perform action specified 2.0 Exhale Sec SpO2 HR Sec Tidal Volume Pause cmH2O Inhale Menu Standby cmH2O ---23 l/min l/min 4 8 9 5 3 Sec Tidal Volume ---509mlml +40 Menu cmH2O 2.0 Inhale Sec Therapy CoughAssist T70 Peak Cough Flow 222 --23 l/min l/min -40 cmH2O 2.0 -Exhale Settings Sec Standby 0 SpO2 HR 12 USB connector (for service only) 13 SpO2 connector 14 DC power inlet to power on the •Select Therapy to start the treatment 509 507 --- mlml 2.0 -- Inhale Sec Therapy Standby CoughAssist T70 •Select Standby •Press device Tidal Volume cmH2O 05/24/2012 05:02 PM •To turn power off, press 1 : Auto Exhale 2.0 Sec SpO2 HR 99 86 2.0 Sec Tidal Volume Settings Menu Peak Cough Flow 222 23 l/min l/min -40 cmH2O 2.0 Exhale Settings Sec SpO2 HR 99 86 2.0 Sec Standby Options Tidal Volume 509 ml 514 +40 Pause Menu cmH2O 2.0 Inhale Sec Therapy CoughAssist T70 To temporarily unlock the device •While in Standby screen, press below the down button Menu and hold manual switch to the right for 5 seconds Note: When appears on the main screen, the device is unlocked. If the Access menu is not set to Full, the device will switch automatically to limited access after 5 minutes of inactivity. Menu Access Full Detailed ViewCough Flow ONl/min Peak Language English Pressure Units cmH2O LCD Brightness 5 Date Format dd/mm/yyyy cmH2O Sec Time Format hh:mm AM Month 5 Day 31 Year 2012 Hour 9 AM --23 -40 SpO2 HR 99 86 -- Exhale Settings Finish Tidal Volume 509 --- mlml +40 Pause cmH2O -Inhale Navigate Menu Sec Therapy Modify CoughAssist T70 To select access option •Press the up button below Menu •While ‘Option’ is highlighted in green press Select •While ‘Menu Access’ is highlighted, press Modify and then Edit to select ‘Limited’ or ‘Full’ access •Press OK to validate •Press Finish and Exit to return to the main screen •Pressing Modify will allow changing the parameter highlighted in green, OK validates the choice and Finish returns to main screen •Three Presets are available to save a group of settings for different circumstances cmH2O 2.0 Inhale Sec Therapy 1 : Auto 03/01/2012 07:03 07:01 PM Peak Cough Flow Tidal Volume Standby Settings 280 507 l/min ml Preset 1 Mode Peak Cough Flow Auto l/min Cough-Trak OFF Inhale Pressure 40 cmH2O Inhale Flow Medium cmH2O Secsec Inhale Time 2.0 Exhale Pressure -40 cmH2O Exhale Time 2.0 sec Pause Time 2.0 sec SpO2 HR --23 -40 99cmH2O 86 -- 509 --- mlml +40 Pause Exhale Settings Finish Tidal Volume cmH2O Navigate Menu -Inhale Sec sec Therapy Modify Monitoring view and icons •Press the up button Menu below •While ‘Option’ is highlighted in green, press Select and navigate down to ‘Detailed View’ •Press Modify and Edit to change ‘OFF’ or ‘ON’ CoughAssist T70 1, 2, 3 Auto, Manual OFF/ON Only available in Auto mode 0 to 70 cmH2O, in increments of 1 cmH2O Low, Medium, High 0 to 5s, in increments of 0.1s Only available in Auto mode 0 to -70 cmH2O, in increments of 1 cmH2O 0 to 5s, in increments of 0.1s Only available in Auto mode 0 to 5s, in increments of 0.1s Only available in Auto mode with Cough-Trak OFF Note: Any change of settings made during therapy will automatically take effect at the beginning of that phase in the next cycle. Symbols and icons Detailed View ‘ON’ 1 : Auto 03/01/2012 07:04 07:03 PM 60 40 Peak Cough Flow 20 280 --23 l/min l/min -40 Exhale Standby 0 SpO2 HR 20 60 cmH2O Tidal Volume 509 507 --- mlml +40 Sec Sec 40 99 86 2.0 2.0 -- cmH2O cmH2O Pause 2.0 -Inhale Sec Settings Menu Pulse oximeter: green means connected (flashing) ? ? Breath synchronization tool: displayed remaining time of each phase during Auto mode ? ?? writing: Memory card copying data? to SD card ? Full access ? CoughAssist E70 Detailed View ‘OFF’ Manual 11 ::Auto ? Remote control: (foot pedal) connected 03/01/2012 07:02 07:03 PM 60 40 20 -40 --23 l/min cmH2O Peak Cough Flow Exhale -40 cmH2O Exhale Settings Standby 0 SpO2 HR -Sec 20 40 99 86 60 cmH2O +40 509 --- mlml Tidal Volume cmH2O +40 Pause Menu cmH2O Inhale Inhale -Sec Standby Therapy With ? means questionable data SD card inserted ? Therapy Standby •Press Finish and Exit to return to the main screen Note: When selecting detailed view ‘OFF’, the following parameters are not displayed: – Peak Cough Flow –SpO2 –HR – Tidal Volume – Exhale and Inhale Time setting and counter – Pause Time setting Color code: green = pause yellow = exhale blue = inhale SD card error •Press OK to validate The settings available are displayed in the table below: Preset Mode Cough-Trak Inhale pressure Inhale flow Inhale time Exhale pressure Exhale time Pause time 4 To change monitoring view 509 ml 514 +40 Pause •The scroll buttons allow selection of desired parameter 03/01/2012 31/05/2012 07:03 09:39 AM PM Standby 60 cmH2O +40 Menu Connect the device to AC or DC power source or use the detachable battery must be kept uncovered 40 99 86 2.0 Sec 1 : Auto 20 Pause 7 Fan exhaust – Air outlet 11 Remote control connector 12 14 99 86 2.0 Pause 20 To stop therapy 9 Filter – Air inlet 10 SpO2 HR 40 To start therapy 10 AC power inlet 13 Sec 03/01/2012 07:04 05/24/2012 07:03 PM 60 6 Breathing circuit connection 8 Detachable battery 11 2.0 Exhale Settings CoughAssist T70 change setup 1 : Auto 05/24/2012 05:02 PM Therapy -40 10 •The therapy settings are accessible through the left button below Settings cmH2O Sec Peak Cough Flow 5 Navigate menus or 6 Limited access (lock) permits the user to select between Preset therapy settings, while Full access (unlock) will allow the user to change all settings. -40 2.0 on screen 7 To modify settings 509 ml 514 +40 1 : Auto Settings Standby 222 23 l/min l/min CoughAssist E70 99 86 2.0 05/24/2012 05:02 PM How to lock/unlock 03/01/2012 07:03 PM Peak Cough Flow 1 : Auto Peak Cough Flow Standby 3 Power on/Power off 7 Modifying therapy settings External battery indicator: red = few minutes left Detachable battery indicator: red = few minutes left ? ? ---- No measurement is performed or questionable data ? Informational message: information available in the Information Log Power source in use indicator: box is placed around the battery being used Charging indicator: detachable battery is being charged CoughAssist E70 Note: When the remote control foot pedal is connected, the manual switch is disabled. 15553_RIP_CoughAssistT70_QStartGuide_1099095_v1.indd 7-12 8/30/12 4:23 PM