Download View - Onset
Transcript
Tattletale Installation and Operation Manual ANSI-C Section 3 - Operating the CrossCut Program Table 3-4: File Menu Option Descriptions (Continued) File Menu Option (Alt-F) Description Save As Allows you to save the program in the active window to disk under a new name. This is useful when you wish to experiment with your program, but you don’t want to make the changes permanent to your original file. If the file already exists, it will ask to confirm before overwriting the file. Print Sends the program in the screen buffer to the DOS PRN device for printing. No header or page eject commands are sent to the printer. Print selection Sends the currently selected text to the printer. If no text is currently selected, you will be notified and no action will take place. Change dir Allows you to change the current DOS working directory. You will be in this new directory when you exit CrossCut. DOS shell Suspends CrossCut and launches a new copy of the DOS shell. This also causes the serial port to be closed. You can execute any DOS commands here even other communications programs. When you're done, use the DOS command EXIT to return to CrossCut and the serial port will be opened in the same state it was in before (any characters that were sent to the serial port while running the second DOS session will be lost). NOTE: CrossCut is still in memory so there will be limited memory for other programs. Quit (Alt-Q) D-3285-C Exits CrossCut, frees up its memory and returns to the DOS command interpreter. Onset Computer Corporation - Model 8 with C Page 3-9