Download Reference Guide
Transcript
Presentation mode Release 19.0 Reports Introduction The Reports layout tab opens a series of pre-formatted reports that are generated by WYSIWYG, containing all data entered in CAD and Data modes. These reports are available for you to use as is, or to modify to suit your needs. Unlike the spreadsheets in Data mode, you cannot edit fixture data here. Reports are designed to be printed documents. You can, however, modify their setup and layout. Working with reports To modify a report 1 From the Options menu, choose View Options. Result: The View Options window is displayed. Tip: You can use the View Options tool on the Standard toolbar. 2 Modify options as desired. 3 Click OK. General tab Options on the General tab affect the scene that is displayed in the report. Follow User Scene: Select this check box to filter the report according to the current scene. The current scene is displayed in the drop-down list on the Scene toolbar and in the Scene Database dialog box (from the File menu, choose Scenes). To filter your show information based on the scene selected, click to clear the check box, and then select the desired scene from the Scene drop-down list. Only fixtures on the active layers (or layers in the scene) are displayed in the report. Tip: You can change the current scene at any time by using either the Scene toolbar or the Scene Database dialog box. For more information on scenes, refer to “Scenes” on page 174. 298