Download user manual

Transcript
CRL Extensions
247
You shouldn’t use this extension (or the CRYPT_CRLREASON_CERTIFICATEHOLD reasonCode) unless you really need to because although a
mechanism was defined for placing a certificate on hold, no-one ever defined one for
removing it from this state, so once it’s on hold it’s revoked no matter what the
reasonCode says.
Invalidity Date
This extension contains the date on which the private key for a certificate became
invalid. The extension is identified by CRYPT_CERTINFO_INVALIDITYDATE, is
valid in CRLs, and is available at all certificate processing levels:
Attribute/Description
Type
CRYPT_CERTINFO_INVALIDITYDATE
Time
The date on which the key identified in a CRL became invalid.
Note that a CRL contains both its own date and a date for each revoked certificate, so
this extension is only useful if there’s some reason for communicating the fact that a
key compromise occurred at a time other than the CRL issue time or the certificate
revocation time.
Issuing Distribution Point and Certificate Issuer
These extensions specify the CRL distribution point for a CRL and provide various
pieces of additional information about the distribution point. The
issuingDistributionPoint specifies the distribution point for a CRL, and the
certificateIssuer specifies the issuer for an indirect CRL as indicated by the
issuingDistributionPoint extension.
The issuingDistributionPoint and aaIssuingDistributionPoint extensions are identified
by CRYPT_CERTINFO_ISSUINGDISTRIBUTIONPOINT and
CRYPT_CERTINFO_AAISSUINGDISTRIBUTIONPOINT, are valid in CRLs, and
are available at the CRYPT_COMPLIANCELEVEL_PKIX_PARTIAL processing
level and above:
Attribute/Description
Type
CRYPT_CERTINFO_ISSUINGDIST_FULLNAME
GeneralName
The location at which CRLs may be obtained. You should use the URL
component of the GeneralName for this, avoiding the other possibilities.
CRYPT_CERTINFO_ISSUINGDIST_USERCERTSONLY
CRYPT_CERTINFO_ISSUINGDIST_CACERTSONLY
CRYPT_CERTINFO_ISSUINGDIST_SOMEREASONSONLY
CRYPT_CERTINFO_ISSUINGDIST_INDIRECTCRL
See certificate standards documents.
Attribute/Description
Boolean
Boolean
Numeric
Boolean
Type
CRYPT_CERTINFO_AAISSUINGDIST_FULLNAME
GeneralName
The location at which CRLs may be obtained. You should use the URL
component of the GeneralName for this, avoiding the other possibilities.
CRYPT_CERTINFO_AAISSUINGDIST_
SOMEREASONSONLY
CRYPT_CERTINFO_AAISSUINGDIST_INDIRECTCRL
CRYPT_CERTINFO_AAISSUINGDIST_USERATTRCERTS
CRYPT_CERTINFO_AAISSUINGDIST_AACERTS
CRYPT_CERTINFO_AAISSUINGDIST_SOACERTS
See certificate standards documents.
Numeric
Boolean
Boolean
Boolean
Boolean
Note that the CRYPT_CERTINFO_ISSUINGDIST_SOMEREASONSONLY and
CRYPT_CERTINFO_AAISSUINGDIST_SOMEREASONSONLY attributes have
the same allowable set of values as the cRLReasons reasonCode, but in this case is
given as a series of bit flags rather than the reasonCode numeric value (because
X.509 says so, that’s why). Because of this you must use CRYPT_-