Download SCADA System Guide
Transcript
D-8 Worksheets SCADA Worksheet 3.1 Classic PLC-5 Remote Station Configuration 1785-KE Module Switch Settings Page 1 of 1 Use this worksheet to record your station’s configuration. Make as many copies of this worksheet as you need. Do not write on the original. For descriptions on each line item, see the 1785-KE DH+ Communications Interface Module User Manual, publication 1785-6.5.2. Switch Assembly SW1 Switch Assembly SW2 Switch Assembly SW3 Example Example For: Choose: Set switch To: Protocol half-duplex 1 on 1 Error check CRC 2 on 2 Parity none 3 on 3 Embedded responses no 4 on 4 Duplicate message ignore 5 on 5 Handshaking signals use 6 on 6 Diagnostic command execute Station address 7 1 on 1 2 on 2 3 on 3 4 on 4 5 on 5 6 off 6 7 off 7 8 off 8 1 on 1 2 on 2 3 off 3 4 on 4 5 on 5 6 off 6 1-4 off DH+ communication rate 57.6 K RS-232 communication (must match the rate modem’s rate) 9600 in this example Addressing mode Switch Assembly SW4 Publication AG-6.5.8 - October 1998 remote Config. Choice: Reserved Set switch 1-4 To: off