Download - Service, Support
Transcript
Electrical connection 5.7 Shielding, grounding, and equipotential bonding 5.7 Shielding, grounding, and equipotential bonding Important notes regarding shielding, grounding and equipotential bonding Correct installation, correctly connecting cable shields and protective conductors is very important, not only for the safety of personnel but also for the effect on interference emission and interference immunity. WARNING Risk of electric shock! Hazardous touch voltages can be present at unused cores and shields if they have not been grounded or insulated. • Connect the cable shields to the respective housings through the largest possible surface area. Use suitable clips, clamps or screw couplings to do this. • Connect unused conductors of shielded or unshielded cables and their associated shields to the grounded enclosure potential at one end as minimum. Alternatively: Insulate unused conductors of shielded or unshielded cables and their associated shields. The insulation must be able to withstand the rated voltage. Further, unshielded or incorrectly shielded cables can lead to faults in the drive – particularly the encoder – or in external devices, for example. Electrical charges that are the result of capacitive cross coupling are discharged by connecting the cores and shields. NOTICE Device damage as a result of leakage currents for incorrectly connected protective conductor High leakage currents may damage other devices if the motor protective conductor is not directly connected to the power module. • Connect the motor protective conductor (PE) directly at the power unit. NOTICE Device damage as a result of leakage currents for incorrect shielding High leakage currents may damage other devices if the motor power cable shield is not directly connected to the power module. • Connect the power cable shield at the shield connection of the power module. Note Apply the EMC installation guideline of the converter manufacturer. For Siemens converters, this is available under document order No. 6FC5297-□AD30-0□P□. Naturally cooled SIMOTICS T-1FW6 built-in torque motors 64 Operating Instructions, 10/2014, 6SN1197-0AF02-0BP1