Download Package `gstat`

Transcript
34
pcb
pcb
PCB138 measurements in sediment at the NCP, the Dutch part of the
North Sea
Description
This data set gives a point set with altitudes, digitized from the 1:10,000 topographical map of the
Netherlands.
Usage
data(pcb)
Format
This data frame contains the following columns:
year measurement year
x x-coordinate; UTM31
y y-coordinate; UTM31
coast distance to coast, m.
depth sea water depth, m.
PCB138 PCB-138, measured on the sediment fraction smaller than 63 µ, in µg/kg dry matter;
BUT SEE NOTE BELOW
yf year; as factor
Note
A note of caution: The PCB-138 data are provided only to be able to re-run the analysis done in
Pebesma and Duin (2004; see references below). If you want to use these data for comparison with
PCB measurements elsewhere, or if you want to compare them to regulation standards, or want
to use these data for any other purpose, you should first contact mailto:basisinfodesk@
rikz.rws.minvenw.nl. The reason for this is that several normalisations were carried out that
are not reported here, nor in the paper below.
References
http:/www.gstat.org/, http://www.rikz.nl/
Pebesma, E. J., & Duin, R. N. M. (2005). Spatial patterns of temporal change in North Sea sediment
quality on different spatial scales. In P. Renard, H. Demougeot-Renard & R. Froidevaux (Eds.),
Geostatistics for Environmental Applications: Proceedings of the Fifth European Conference on
Geostatistics for Environmental Applications (pp. 367-378): Springer.
See Also
ncp.grid