Download FrameMaker MIF Reference Guide
Transcript
ADOBE FRAMEMAKER 29 MIF Reference > > # end of TblColumn <TblColumn <TblColumnNum 1> # Second column. <TblColumnWidth 1.5"> # Width of second column. > # end of TblColumn <TblCellMargins 6.0 pt 6.0 pt 6.0 pt 4.0 pt> <TblLIndent 0.0"> # These are exactly like paragraph <TblRIndent 0.0"> # format properties. <TblAlignment Center > <TblPlacement Anywhere > <TblSpBefore 12.0 pt> <TblSpAfter 12.0 pt> <TblBlockSize 1> <TblHFFill 15> # No fill for heading row. <TblHFColor `Black'> <TblBodyFill 5> # Use 10% gray fill for main body rows. <TblBodyColor `Black'> <TblShadeByColumn No > # Shade by row, not by column. <TblShadePeriod 1> # Shade every other row. <TblXFill 15> # No fill for alternate rows. <TblXColor `Black'> # Color for alternate rows. <TblAltShadePeriod 1> <TblLRuling `Thin'> # Use thin left outside rule. <TblBRuling `Thin'> # Use thin bottom outside rule. <TblRRuling `Thin'> # Use thin right outside rule. <TblTRuling `Medium'> # Use medium top outside rule. <TblColumnRuling `Thin'> # Use thin rules between columns. <TblXColumnRuling `Thin'> <TblBodyRowRuling `Thin'> # Use thin rules between rows. <TblXRowRuling `Thin'> <TblHFRowRuling `'> # No rules between heading rows. <TblSeparatorRuling `Medium'> # Use medium rule after heading row. <TblXColumnNum 1> <TblRulingPeriod 4> <TblLastBRuling No > <TblTitlePlacement InHeader> # Place title above table. <TblTitlePgf1 # Paragraph format for first <PgfTag `TableTitle'> # paragraph in title. > # end of TblTitlePgf1 <TblTitleGap 6.0 pt> # Gap between title and table. <TblInitNumColumns 2> # Initial number of rows and <TblInitNumHRows 1> # columns for new tables with <TblInitNumBodyRows 4> # this format. <TblInitNumFRows 0> <TblNumByColumn No > # end of TblFormat The TblColumn statement numbers each column and sets its width. A table can have more columns than TblColumn statements; if a column does not have a specified format, the MIF interpreter uses the format of the most recently defined column. Note: A table instance must have at least one TblColumn statement. A table can use a format from the Table Catalog that includes a TblColumn statement or it can include a local TblFormat statement that supplies the TblColumn statement. Adding a Table Catalog You can store table formats in a Table Catalog by using a TblCatalog statement. A document can have only one TblCatalog statement, which must occur before the Tbls statement.