Download Installations Instructions

Transcript
UNI 3 Installation Instructions
Content
1
Planning and preparation work
1.1 Joiner / fitter
1.2 Plumber (if the unit has a water battery)
1.3 Electrician
2 Wall mounting
2.1 Location requirements
2.2 Space required
2.3 Duct locations
3 Floor mounting
3.1 Location requirements
3.2 Space required
3.3 Installation
4 Duct Connection
4.1 Duct connection in the base
4.2 Connecting the unit
5 Electrical work
5.1 Temperature sensor for heating (B1) (if the unit has a water battery)
5.2 Frost sensor for water battery (B5) (if the the unit has a water battery)
5.3 Outdoor air damper (if the unit has a water battery)
6 Plumbing work*
7 Encasing
7.1 Preparations
7.2 Flexit duct cover
8 Installation of control panel CI 60/600
8.1 Content
8.2 Installation of CI60/600
8.3 Concealed installation
8.4 Surface installation
8.5 Finishing off – CI60
8.6 Finishing off – CI600
9 Adjusting the unit
9.1 Adjustment with CI60
9.2 Adjustment with CI600
9.2.2 Temperature regulation
10 Installation of external kitchen hood
10.1 Kitchen hoods without a motor
10.2 Kitchen hoods with a motor
11 Adjusting the kitchen hood
11.1 Kitchen hoods without a motor
11.2 Kitchen hoods with a motor
12 General drawings and system drawings
12.1 System drawing (with heating element)
12.2 System drawing (without heating element)
12.3 General picture (with heating element)
12.4 General picture (without heating element)
12.5 Duct location
13 Technical data
14 Physical dimensions
15 Capacity and sound data
15.1 Supply air side
15.2 Extract air side
16 Temperature efficiency (according to EN 308)
17 Final checks / Starting
17.1 Final checks
17.2 Starting
18 CE Declaration of Conformity
Our products are subject to continuous development and we therefore reserve the right to make changes.
We also disclaim liability for any printing errors that may occur.
2
4
4
4
4
5
5
6
7
10
10
10
10
12
12
12
13
13
13
13
13
14
14
14
15
15
15
16
16
16
16
17
17
18
18
19
19
19
19
19
19
20
20
20
21
21
22
22
23
24
24
24
25
26
26
26
26