Download Software Manual - Phase Motion Control

Transcript
18352
SYS_RXPDO1_OBJ3_SUB
Word
0
---
18353
SYS_RXPDO1_OBJ4_SUB
Word
0
---
18358
SYS_RXPDO1_OBJ5_SUB
Word
0
---
18359
SYS_RXPDO1_OBJ6_SUB
Word
0
---
18360
SYS_RXPDO1_OBJ7_SUB
Word
0
---
18361
SYS_RXPDO1_OBJ8_SUB
Word
0
---
SYS_RXPDO1_TYPE:
object 1400.2h - “PDO 1 transmission type”.
Defines the transmission/reception cheracter of the PDO.
The supported type are:
Transmission type cyclic acyclic synchronous asynchronous RTR only
1
253
254
x
x
x
x
x
SYS_RXPDO1_COBID:
object 1400.1h - “PDO 1 COB-ID ”.
Defines the CAN identifiers of the PDO.
The default setting is 000; in this mode the COB-ID become the standard
CANopen for the present node number:
200h + node ID (SYS_NODE)
SYS_RXPDO1_OBJx_IDX:
object 1600.1/8h - “Parameter index mapped at object x of PDO 1”.
Setting of the index for the variable mapped on the object “x” on PDO 1.
The sub-index from 1 to number of entries contain the information about the
mapped application variables.
SYS_RXPDO1_OBJx_SUB:
Setting of the sub-index for the variable mapped on the object “x” on PDO 1.
NOTE: The “x” notation designates the object mapped from the PDO1
4.6.4
CANopen ª DS301 Settings ª Rx PDO 2
Value
IPA
Name
Type
Unit
Default
Min
Max
18303
SYS_RXPDO2_TYPE
Enum
sync
1
rtr
253
async 254
18309
SYS_RXPDO2_COBID
Word
000
18322
SYS_RXPDO2_OBJ1_IDX
Word
24640
---
18323
SYS_RXPDO2_OBJ2_IDX
Word
24672
---
18324
SYS_RXPDO2_OBJ3_IDX
Word
0
---
18325
SYS_RXPDO2_OBJ4_IDX
Word
0
---
18330
SYS_RXPDO2_OBJ5_IDX
Word
0
---
32
async
---
181h
57Fh
Hex