Download Er - SED
Transcript
ABSTRACT This report presents the project done during the Industrial Attachment with the French national research laboratory, Institut National de Recherche en Informatique et en Automatique, Rhone-Alpes, France (INRIA Rhone-Alpes). The project looks into implementing a real-time serial interface between 2 hardware, namely the Motorola MPC555 microcontroller and the SICK LMS (Laser Measurement System), on the Cycab. This is to enable the Cycab to have a real-time laser sensor guiding system. Work was done on programming the MPC555 to communicate with the SICK LMS. Numerous tests were also done to look into the response of the LMS when different sets of telegrams were sent. Once the real-time serial interface was implemented, work was concentrated on writing application programs for the SICK LMS and MPC555. Application programs like Car Following and Obstacle Avoidance are currently in the process of implementation. This report is divided into 5 Chapters. An introduction of the project with the objectives, work and hardware involved will be given first. After that, the first Chapter will present a more detailed introduction of the main hardware used in the project. In the following Chapter, this report looks into the implementation work done on the serial interface. Then, Chapter 3 will present the application programs being done currently. Comments and discussions are given in Chapter 4. Finally, the report ends with the Summary and Conclusion in Chapter 5. ii