Download INSTRUCTIONS
Transcript
HONING LOAD METER BOTTOM OF STROKE 0 20 40 60 80 100 HONING TIME POWER ON DWELL CYCLES 1 2 3 POWER OFF 0 MODE SELECTOR EMERGENCY STOP FIGURE 2-2, Operator Controls TABLE 2-1, Operator Controls SYMBOL DESCRIPTION FUNCTION (HONING LOAD METER) LED Indicates stone cutting action and cylinder straightness. (HONING TIME) Dial Switch is used to set honing time in seconds, as displayed in the indicator window. (BOTTOM OF STROKE) Yellow Indicator Light Indicates when Hone Head is at the bottom of the stroke. (POWER ON) White Pushbutton Switch Turns ON electrical power to Machine’s Operator Controls; places machine in standby mode. (POWER OFF) Red Pushbutton Switch Turns OFF electrical power to Machine’s Operator Controls; and turns off power to motors, but does not shut off power to the machine. 3 Position Selector Switch Switch is used to set the number of strokes the machine will dwell at the bottom of stroke, as displayed in the indicator window. 2 Position Selector Switch TIMED – Machine will hone until the number of seconds on the Honing Time display reaches zero. Zero SHUTOFF – Machine will hone until zero is reached on the Graduated Feed Dial (5). Red Locking Pushbutton Switch Turns OFF power, Stopping the Machine. MUST be released before Power ON Button can be depressed. (DWELL CYCLES) 1 23 (MODE SELECTOR) (EMERGENCY STOP ) 0 6