Download ADT user manual

Transcript
1.3 Probe
1.3.1 Probe Safety
A guard around the probe body provides a finger barrier for protection from
electric shock.
Picture 1-6
Connect the probe to the oscilloscope and connect the ground terminal to ground
before you take any measurements.
: ● To avoid electric shock when using the probe, keep fingers behind the guard
Note
on the probe body.
● To avoid electric shock while using the probe, do not touch metallic
portions of the probe head while it is connected to a voltage source.
Connect the probe to the oscilloscope and connect the ground terminal to
ground before you take any measurements.