Download System Programming Comdial DSU / DSU II System Programming

Transcript
IMI66–132
DSU II Digital Telephone System
Versatile Voice Processing
The digital telephone system supports the Versatile Voice Processing (VVP) voice mail system.
In addition to the programming requirements detailed in the Voice Mail Interface section
beginning on page 240, the following sections detail specific procedures for programming the
system to support the VVP voice processing system.
Using the Tracker Paging System with VVP
Description: The Tracker is available for use with the DSU II digital telephone system. To
make effective use of a Tracker paging system used in conjunction with the
VVP voice mail system, program two mailboxes for each person using a
Tracker. The second mailbox will be used to park the caller and track the
called person. When a caller decides to Press 3 for other options, VVP will
place the call in a Park Orbit while paging the called party.
NOTE: If the VVP system includes the Visual Voice Mail option, you cannot use
Tracker and VVM at the same time since they both use the COM 1 serial data
port.
Standard Mailbox
To Program:
1. Leave the Pager Number field blank.
2. Set the Pager Type to Name.
3. In the If caller chooses other options field, select Go to box.
4. In the Box field enter a box number that is defined as a paging box.
Paging Mailbox
To Program:
Set the following parameters for the paging mailbox.
1. Define this box number so that the system can link it to the person’s regular
mailbox but do not choose a number that is another extension or mailbox. For
example, precede the mailbox number with a 7 for all pager boxes.
2. Select Blind Transfer Type.
3. Enter *01 plus the actual mailbox number for Transfer To.
4. Record a name for this box such as, Tracker for Joe Smith or Paging Joe Smith.
Programming the DSU II System
249