Download Caution

Transcript
CHAPTER 4 CONTROL PANEL
The following settings can be made in this mode:
Display Message
Page Format Mode
PAPER
=LETTER
Set cut sheet paper size to letter, A4, legal,
B5, A5, B6, A6, or executive, or envelope
size to COM10, Monarch, C5, or DL.
LEFT M
=
Set the left margin at column 0-126 at
10cpi.
0C P
RIGHT M = 80C P
Set the right margin at column 10-136 at
10cpi. See “List of Factory Settings” in this
chapter.
TOP M
=0.5" P
Set the top margin at a distance from the top
edge of the paper: 0, 0.33, 0.5, 1.0, 1.5, or
2.0 inches. factory setting = 0.33 (NonHP), 0.5 (HP)
BOTTOM M=0.5" P
Set the bottom margin at a distance from the
bottom edge of the paper: 0, 0.33, 0.5, 1.0,
1.5, or 2.0 inches. factory setting = 0.33
(Non-HP), 0.5 (HP)
LINES
Set the number of lines per page from 5 to
128 lines. See “List of Factory Settings” in
this chapter.
= 60L P
The letter “P” in the display messages indicates that the page orientation is
portrait. The letter “L” is displayed when it is landscape.
Display Message
Page Format Mode (Continued)
X OFFSET=
0
Move the print start position (at the upper
left corner on pages) horizontally up to
-500 dots to the left or +500 dots to the
right in 300dpi dot unit increments: factory
setting = 0.
Y OFFSET=
0
Move the print start position (at the upper
left corner on pages) vertically up to -500
dots downward or +500 dots upward in
300dpi dot increments: factory setting = 0.
4–23