Download Canon iPF8400 Users Guide, Basic
Transcript
Cannot recognize print head x. (x is L, R, or not displayed) iPF8400 Cannot recognize print head x. (x is L, R, or not displayed) Cause Corrective Action No Printhead is installed. The Printhead cannot be recognized because it is not installed correctly. Follow these steps to install the Printhead. 1. Open the Top Cover. 2. Install the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is displayed. If neither left or right is indicated, install both Printhead L and Printhead R. (See "Replacing the Printhead.") → P.34 Follow these steps to reinstall the Printhead. 1. Open the Top Cover. 2. Reinstall the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is displayed. If neither left nor right is indicated, re-install both Printhead L and Printhead R. (See "Replacing the Printhead.") → P.34 Execute printhead cleaning. Cause The Printhead nozzles are clogged. Corrective Action Follow these steps to clean the Printhead. 1. Stop printing by pressing ▲ or ▼ to select Stop Printing. 2. Clean the Printhead. (See "Cleaning the Printhead.") → P.55 Error Message If the message is still displayed when printing, replace the Printhead. (See "Replacing the Printhead.") → P.34 Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may affect the printing quality. If OK is shown on the Display Screen, clean the Printhead. Messages regarding printheads 1. Press the OK button on the Control Panel to stop printing. 2. Clean the Printhead. (See "Cleaning the Printhead.") → P.55 If the message is still displayed when printing, replace the Printhead. (See "Replacing the Printhead.") → P.34 148 Basic Guide