Download User`s Manual

Transcript
ɡ About the WDR-3 Web Viewer
Q.1 I cannot send mail, why?
A
The only way to test if warning mail can be sent, is to actually send a mail and see if it is
received or not. If the transmission failed, one of the following may be the reason:
In the Detailed Network Settings, the necessary gateway address settings have not
been made.
ɜ In the Detailed Network Settings, the necessary DNS settings have not been made.
ɜ In the Detailed Network Settings, the necessary SMTP Server settings have not been
made.
ɜ Check the ESS-ID for mistakes in upper and lower case letters.
ɜ The SMTP server needs SMTP authentication or POP Before SMTP. (May need to
change Provider.)
ɜ The SMTP server will not recognize the Sender Address. (May need to change
Provider.)
ɜ
Q.2 I cannot connect to a wireless LAN.
Is there a way to check the wireless LAN status?
A
Unfortunately, there is no way to check. But you can check the following:
ɜ Is
the ESS-I or WEP key code incorrect?
you using a Wireless LAN card other than the ones we endorse.
ɜ Are
Q.3 I tried using a different wireless LAN card and now I can't get
communication to work, what happened?
A
Even if all settings remain unchanged, after putting in a different wireless LAN card and
restarting, communication will no longer be able to occur.
That is because the MAC address of the previously used LAN card is still in the APR table
in your computer.
In order to communicate using the new LAN card, you can either erase the APR table or
reboot your computer.
Q.4 If I restart the system, what happens to the already recorded data?
A
Even if you restart the system, the recorded data will be saved and will not be erased or
lost.
If during a recording session, recording will be temporarily halted, but the recording
operations will continue after the restarting has been completed.
Q.5 I forgot the password, what should I do?
A
First, return the settings to the factory default settings and then redo the settings.
64