Download Jewett
Transcript
Jewett shield cable with certain grounding. In case of 3 phases motor, the phase sequence should be carefully identified. Even if the clear phase sequence is not much clear, you may use the hand wheel to reach the half open position, then adjust the sequence after power on. The brake function should be set as inactive for 3 phases motor (A11=0),its brake system is functioned by the external circuit,its parameters may set after power-on. If the actuators run reversely with the signal 4~20mA (default set is that clockwise is open for quarter-turn and move-up for linear) , you may just set the function A6 as reverse. All the adjustment is a smart operation and need no adjustment on the potentiometer. Please close the control box and fasten the screws to ensure it is tightly sealed., especially the cable outlet and inlet, or the dust and steam will go into the box to cause the electrical shorts. Jewett series electrical actuator equipped with the self-lock function, so the motor do not have any mechanical brake. Furthermore, the motor is characterized with it’s high quality on tightness. Be sure to coat the sealant after the maintenance of the motor.