Download PAPI Documentation

Transcript
PAPI Documentation, Release 1.2.20151020173439
3. Make the median combine + sigmaclip of Flat LAMP-OFF frames
4. Make the median combine + sigmaclip of Flat LAMP-ON frames
5. Subtract lampON-lampOFF (implicit dark subtraction)
6. (optionally) Normalize the flat-field with median (robust estimator)
Note that we do not need to subtract any MASTER_DARK; it is not required for DOME FLATS (it
is done implicitly because both ON/OFF flats are taken with the same Exposition Time).
Build Master Twlight (sky) Flat
This command is used to produce a Master SKY FLAT file from a set of files currectly selected in the Data List
View. It checks that all the selected files are compliant, ie., have the same FILTER, NCOADD, READMODE
and shape. You have to select at least three SKY_FLAT images (dusk or dawn). The procedure will look for the
required master dark frames to subtract in the current output directory and in the external calibration directory. If
some of the master dark are not found, then the procedure will fail.
The procedure to create the master sky flat is as follow:
1. Check the TYPE (sky flat) and FILTER of each Flat frame If any frame on list missmatch the FILTER, then
the master twflat will skip this frame and continue with then next ones. EXPTIME do not need be the same,
so EXPTIME scaling with ‘mode’ will be done.
2. Check either over or under exposed frames ( [10000 < mean_level < 40000] ADUs )
3. We subtract a proper MASTER_DARK, it is required for TWILIGHT FLATS because they might have diff
EXPTIMEs.
4. Make the combine (median + sigclip rejection) the dark subtracted Flat frames scaling by ‘mode’.
5. Normalize the sky-flat wrt SG1 detector, dividing by its mean value.
Build GainMap
This command is used to produce a Master GainMap file from a set of files currectly selected in the Data List
View. It checks that all the selected files are compliant, ie., have the same FILTER, NCOADD, READMODE and
shape. You have to select at least three flat frames (dome, dusk or dawn). For sky flats, the procedure will look for
the required master dark frames to subtract in the current output directory and in the external calibration directory.
If some of the master dark are not found, then the procedure will fail. Dome flat do not need dark subtraction.
The procedure to create the master sky flat is as follow:
1. Check the TYPE (sky flat) and FILTER of each Flat frame If any frame on list missmatch the
FILTER, then the master twflat will skip this frame and continue with then next ones. EXPTIME
do not need be the same, so EXPTIME scaling with ‘mode’ will be done.
2. Create the proper master dome/sky flat.
#. Once the master dome flat is created, the procedure will compute the gainmap as follow:
Build BPM
TBC
Apply Dark & FlatField & BPM
This option subtracts a master dark file, then divides by a flat field and finally mask the bad pixels on the current
selected files. The master dark and master flatfield files can be searched for automatically into the output and
external calibration directories or can be selected manually by the user.
20
Chapter 2. Contents