Download Manual - Amazon Web Services

Transcript
Lvl
Menu item
2
MAX VOLTAGE SET
2
VOLTAGE ON SET
2
VOLTAGE OFF SET
2
1
2
3
EXIT
LIST SET
MODE SET
FIXED MODE
3
LIST MODE
2
3
CALL LIST FILE
RECALL N
2
EDIT LIST FILE
3
4
4
3
4
4
3
4
4
3
4
4
2
3
2
CURRENT LIST
ONCE
REPEAT
VOLTAGE LIST
ONCE
REPEAT
POWER LIST
ONCE
REPEAT
RESISTANCE LIST
ONCE
REPEAT
CALL TEST FILE
RECALL N
EDIT TEST FILE
2
LIST STORE MODE
3
3
3
3
2
1
8 X 120 STEPS
4 X 250 STEPS
2 X 500 STEPS
1 X 1000 STEPS
EXIT
LOAD ON TIMER
8500 DC Load Series
Function
the maximum power you can set.
Set the maximum allowed voltage. Exceeding this
value will cause the load to shut off. This value also
becomes the maximum voltage you can set.
Used to set an ON voltage threshold. See the Voltage
threshold section. Default: 0.00 V
Used to set an OFF voltage threshold. See the
Voltage threshold section. Default: 0.00 V
Return to prior menu level.
Lists are programmed sequences of load values.
Load characteristics set by front panel.
Load characteristics are dynamic and controlled by a
list stored in memory.
Recall an existing list from nonvolatile memory.
N is list number.
Note that each list file has four lists, one for each
operation mode (CC, CV, CW, CR).
List is executed once per trigger.
List is repeatedly executed after the trigger is received.
List is executed once per trigger.
List is repeatedly executed after the trigger is received.
List is executed once per trigger.
List is repeatedly executed after the trigger is received.
List is executed once per trigger.
List is repeatedly executed after the trigger is received.
Recalls a stored test file (see Test files section).
N is file number.
See Test files section for more details.
Set how the nonvolatile memory is partitioned to store
lists. You can choose between numerous short lists or
fewer longer lists.
Return to prior menu level.
Enable a timed load.
Version: 031015
Page 14 of 77