Download Manual C.diff-Type AS-1 Kit

Transcript
www.alere-technologies.com
www.alere.com

Prepare a Master Mix by combining 3.9 µL of B1+ labelling reagent, 0.1 µL of B2 labelling
enzyme and 1.0 µl of B3Cdi primer mix per sample.

Add 5 µL DNA (0.5-2 µg) prepared as described above to a 5 µL aliquot of the Master Mix.
Do not forget to label the vial!

Perform amplification in a pre-programmed thermocycler (such as Mastercycler gradient
with heated lid, VWR, cat# 460-0108) according to the following protocol:
Pre-heat cover / lid to 105 °C
300 sec at 96 °C
60 sec at 96 °C
55 cycles with:
20 sec at 50 °C
40 sec at 72 °C
Cool down to 4 °C, hold

The amplification products can be stored frozen until usage.
Please note: When using a different device, some adaptations, such as an increase of the
number of cycles, might be necessary. Before establishing routine use, please test the protocol
with a few known reference strains or the control DNA (CM) supplied upon request. We
recommend as reference strain the following:
Clostridium difficile
DSM No.: 27543
Strain designation: 630
https://www.dsmz.de/catalogues/details/culture/DSM-27543.html
C.diff-Type AS-1 Kit
05_16_04_0019_V01_Manual C.diff-Type AS-1 Kit
12