Download 1 - Finepoint
Transcript
Basic Menu Items in the basic menu Item number Item name Settings 001 PREROLL TIME 0S... 5S ...30S: Set the preroll time to between 0 and 30 seconds in steps of 1 second. A preroll time of at least 5 seconds is recommended when using this unit for editing. 002 a) CHARACTER H-POSITION Adjust the horizontal screen position (as a hexadecimal value) of the text information output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER) connector for superimposed display on the monitor. 00... 0A ...2A (DSR-2000A) /00... 09 ...29 (DSR-2000AP): The hexadecimal value 00 is for the far left of the screen. Increasing the value moves the position of the characters to the right. 003 a) CHARACTER V-POSITION Adjust the vertical screen position (as a hexadecimal value) of the text information output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER) connector for superimposed display on the monitor. 00... 2E ...38 (DSR-2000A)/00... 37 ...43 (DSR-2000AP): The hexadecimal value 00 is for the top of the screen. Increasing the value lowers the position of the characters. 004 SYNCHRONIZE When editing using this unit as a controller and an external VCR connected to this unit via a 9-pin remote control cable or i.LINK cable (DV cable), this item determines whether or not to operate the two units in phase synchronization. ON : Operate in phase synchronization. 005 DISPLAY INFORMATION SELECT OFF: Do not operate in phase synchronization. Determine the kind of text information to be output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER) connector when the CHARACTER switch on the subsidiary control panel is set to ON. T&STA : Time data and the units status. T&UB: Time data and user bit data. (When U-BIT is selected with the COUNTER SEL button, the user bit data and time data arranged in that order are displayed.) T&CNT: Time data and counter count. (When COUNTER is selected with the COUNTER SEL button, the counter count and time data arranged in that order are displayed.) T&T: Time data and time code (TC or VITC). TIME: Timecode (TC or VITC) only. 006 LOCAL FUNCTION ENABLE DATE: Recording date and time. Determine which tape transport control buttons on the control panel are enabled when this unit is controlled from external equipment. DIS: All buttons and switches are disabled. ST&EJ : Only the STOP button and EJECT button are enabled. 007 Chapter 6 008 Setup Menu 009 a) TAPE TIMER DISPLAY MONITORING SELECTION FOR VTR-TO-VTR EDIT CHARACTER TYPE ENA: All buttons and switches except the RECORDER button and PLAYER button are enabled. Determine whether to display the counter in 12-hour mode or 24-hour mode. + –12H : 12-hour mode 24H: 24-hour mode For editing with two DSR-2000A/2000AP units, determine whether the recorder unit is forced into E-E mode when the recorder PLAYER button is pressed to view the player playback signals on the monitor. MANU : Do not force the recorder into E-E mode. AUTO: Force the recorder into E-E mode. Determine the type of characters such as time code output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER) connector for superimposed display on the monitor. WHITE : White letters on a black background. BLACK: Black letters on a white background. W/OUT: White letters with black outline. B/OUT: Black letters with white outline. a) When setting items 002, 003, and 009, watch the monitor screen, and adjust to the required state. 106 Chapter 6 Setup Menu (Continued)